Who Made Sears Outboard Motors?

Who made Sears outboard motors? History. Most of the Sears Gamefisher outboard motors sold by Sears & Roebuck were actually manufactured by Tanaka Power Equipment, a company based in Japan. Other companies manufactured models to be sold under the Gamefisher brand as well. These companies included Eska, Mercury Marine and Johnson.

How fast will a 3hp outboard go?

To give you a simple reference, a 3 hp electric outboard can push a 12 ft boat with 150 kg (331 lbs) load at a max speed of 9 km/h (5.6 mph). That's to say the 3 hp outboard motor can provide more than sufficient propulsion for a 10 ft tender or work as an auxiliary power for a daysailer of up to 1.5 tonnes (3307 lbs).

Who made Ted Williams outboard motors?

The Sears Ted Williams motors were built by either McCulloch or Eska.

Who made Elgin outboard motors?

The design goals of simplicity, economy and high quality are amply demonstrated in the post World War II Sears Elgins. Sears started selling Elgins in 1946 when they offered the low cost 1.25 hp air cooled single. In 1947 they added the water cooled 2.5 hp single and the 3.5 hp and 5.5 hp water cooled twins.

What year is my Mercury outboard by serial number?

Every Mercury outboard has a serial number label located on the transom bracket area of the engine. The latest serial number labels display a 2-digit number in a box at the lower right portion of the label. These digits coincide with the last two digits of the year in which the outboard was manufactured.

Related most asked for Who Made Sears Outboard Motors?

What is a 3HP outboard good for?

The 3HP outboards are widely used for recreational fishing. They usually drive a 3 to 5 meters RIB or aluminum-alloy fishing. The quiet nature of our electric Spirit 1.0 means it won't disturb the fish.

How fast is a 4hp outboard?

Performance Table

RPM Speed
Minimum 3.3 knots
Medium 7.5 knots
Max 12 knots (15 knots with one single person on board)

Who made West Bend outboards?

In later years, Gale and West Bend outboards made up the Ward's offerings through the mid-1960's. Sears offered Elgin brand engines (West Bend) and boats until 1964 when the Sears brand was produced by McCulloch. The Firestone Tire and Rubber Company sold badged Scott-Atwater products after WWII.

Where were Elgin outboard motors made?

The first production of Elgin Motors were made by West Bend and then later they were produced by McCulloch. The first production of Elgin Motors were made by West Bend and then later they were produced by McCulloch.

How can I tell what year my boat motor is?

The serial number can help you determine the year of your engine. Your serial number or model number can be found on the engine's mid-section. Often this plate is also marked with the engine's year too.

How do you tell the year of a boat motor by its serial number?

  • Locate the serial number on the mounting bracket of the outboard motor, or the silver plug on the top of the motor.
  • Write the serial number down.
  • Decipher the serial number using "INTRODUCES" as the key code.
  • Locate the final three numbers to determine the year.

  • How do I know if my boat motor is 2 stroke or 4 stroke?

  • Look at the fuel cap.
  • Look for stickers labeling the equipment (e.g., "Four Cycle" or "No Fuel Mixing").
  • Look for an engine oil fill cap.
  • The Operator's Manual will have engine fuel and oil information in it.

  • How much thrust does a 3hp Outboard have?

    A 3 hp outboard will blow a 50 pound thrust electric motor out of the water - I have both and can make that statement. I can hold the boat with the 3 hp running so it isn't pushing a tremendous amount. A 5 hp probably has somewhere near or over 200 pounds of thrust.

    What size motor do I need for a 12 foot boat?

    10 foot – 3 – 10 hp motor. 12 foot – 10 – 15 hp motor. 14 foot -15 hp motor. 16 foot – 15 – 20 hp motor.

    What is the lightest 4 stroke outboard motor?

    Introducing the lightest weight in its class, EFI 40hp four stroke. Outfitted with a sleek four stroke design and starting at just 209 pounds, you will not find a lighter weight motor in its class.

    How fast is a 2.3 Honda outboard?

    The Honda 2.3HP BF2. 3DKLCH features more power over it's predecessor, plus a 12% larger internal gas tank allows for about an hour more of operation on the water in full throttle!

    2018 Honda 2.3 Hp BF2.3DHLCH Outboard Motor.

    FUEL TANK External
    DISPLACEMENT 57.2 cc (3.49 cubic in)
    BORE AND STROKE 45 x 36 mm (1.8 x 1.4 inches)

    Is 2.5 hp outboard enough?

    The latest models of the 2.5HP outboards are the tiniest you can get. They're the least expensive gasoline outboard you can buy. They're light enough to carry in one hand. They're simple enough to maintain and do most repairs with common tools.

    How fast is 20 horsepower in mph?

    At 60 mph, a typical car needs 10 to 20 horsepower simply to maintain its speed. That energy level is needed to overcome wind resistance and the rolling resistance in the tires.

    How fast will a 15hp outboard go?

    I clocked my setup with gps at 28 mph with me and my gear. Me and just the boat it will hit 32 mph on glass days. 2 guys and gear takes it down to about 20 to 22 mph.

    How fast can a 6hp outboard go?

    How fast will a 8 hp outboard go?

    (6) 1436 G3 with 8hp merc tops out 16 to 18 mph. Alll flat-bottom jon boat runs skinny everywhere canals, creeks, ponds, backlish water. Marshes and lagoons.

    Is West Bend still in business?

    Founded as West Bend Aluminum Company in West Bend, Wisconsin in 1911, the company is one of the country's best-known small appliance brands. With headquarters still in West Bend, WI, it is now a privately held company managed by Focus Products Group, LLC.

    Is West Bend out of business?

    The West Bend Company was a West Bend, Wisconsin, company from 1911 to 2001. The engine division of West Bend was sold to Chrysler, then to Brunswick, and finally to US Motor Power. In 2001, Regal Ware, Inc. of Kewaskum, Wisconsin, acquired certain assets of the West Bend Company.

    Is West Bend Made in USA?

    Since 1911, West Bend® Cookware has built a tradition of making high quality stainless steel cookware in the United States. Regal Ware, Inc. is proud to continue that tradition of American made cookware to this day.

    Did Sears ever sell boats?

    Sears, Roebuck & Co., like its competitor Montgomery Wards, contracted with various manufacturers to produce boats and motors for sale by the national retailer. First marketed as Elgin Boats and Motors, this brand was later dropped and boats and motors were simply marketed as "Sears".

    How old is Evinrude?

    Evinrude Outboard Motors

    Why did OMC go out of business?

    The company has been out of business since mid-December, when it filed for Chapter 11 after a takeover by a corporate raider went belly-up. Some 7,000 of the company's 7,700 employees have been laid off since early December.

    What year model is my Mariner outboard?

    Locate the serial number plate by looking on your motor's transom bracket; the plate will have "Mercury Marine" written on the top. The serial number is the top number on the plate. The number directly beneath this is the year it was manufactured.

    How do I look up boat serial numbers?

    This is often referred to as the “boat serial number” or “boat ID number”. The number is usually found in the stern and can be engraved on a plate or stamped into the boat material.

    Where is the model number on an outboard motor?

    On the side of your motor you'll find a plate. This tells you the make, model and serial number. You'll only need the serial number if it's an outboard motor. Different model plates have the same information but may vary in layout.

    Was this post helpful?

    Author: anyanswer

    Leave a Reply

    Your email address will not be published.