How Do You Program A Key Fob For A 2004 Chevy Silverado?

How do you program a key fob for a 2004 Chevy Silverado?

How do you program a key fob for a Chevy Silverado?

On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons at the same time. Do this until you hear the door locks engage and disengage again. This is an indicator that the key fob has been programmed successfully. Re-insert the newly programmed key into the ignition in the “On” position.

How do you program a key fob for a 2003 Chevy Silverado?

Does 2004 Chevy Silverado Key have chip?

The keys for our trucks DO NOT have chips or resistors of any type in the key(such as the V.A.T.S. system used in the camaros and some other G.M. vehicles) They are standard key blanks.

How do I relearn my GM key fob?

Step 1: Sit in the vehicle with all the doors closed and unlocked. Turn the key to Accessory Power position. Step 2: Press the trip odometer meter reset stem repeatedly until you see "Relearn Remote Key". Step 3: Press and hold the trip odometer meter stem for three seconds.

Related most asked for How Do You Program A Key Fob For A 2004 Chevy Silverado?

How do I relearn a remote key?

Can you program a key fob yourself?

DIY Key Fob Programming

Depending on the age and model of your car, you may be able to program a replacement yourself. The procedure for do-it-yourself key fob programming can vary: Some automakers provide instructions in their owner's manuals. Information can be found in many cases on the internet.

How do you program a key fob without working one?

  • Step 1: Connect pin 1 or pin 4 of the 16-way data link connector to chassis ground.
  • Step 2: Shut all the vehicle doors and turn off the ignition key.
  • Step 3: Turn the ignition key to the Accessory position.
  • Step 4: Now is the time to turn off the ignition.

  • How do you program a new key fob?

  • STEP 1-Turn on the ignition. You should sit in the driver's seat with both the ignition key and the key fob with all doors closed.
  • STEP 2-Press the lock button.
  • STEP 3-Turn off the ignition.
  • STEP 4-Repeat the process with other key fobs.
  • STEP 5-Restart the process.

  • Can you roll windows down with key fob Chevy?

    In addition to folding in your mirrors, your key fob also has the ability to roll your windows down. Navigate to the “remote lock, unlock, and start” menu in the vehicle settings. Scroll down to “remote window operation” and turn the feature on. Hold the unlock button down to roll your windows down.

    What year did Chevy start putting chips in keys?

    GM has first used transponder chip keys in 1997, but were slow to phase the technology in. Today, GM uses transponders on most of their models.

    Are 2005 Chevy Silverado keys chipped?

    The 2005 Chevy Silverado does not have a transponder chip located in the actual key. If You need to replace Your key a standard steel key can be cut to work in Your truck.

    Are 2003 Silverado keys chipped?

    The 2003 Chevy Silverado has the transponder chip located in the key fob that locks and unlocks the truck, not in the actual head of the key itself. If You need to replace Your key it should be pretty easy to do since all You need is a key that is the right length cut to match the OEM key.

    Can you reprogram a Chevy key fob?

    Your Chevy key fob is programmable to remotely control your vehicle's door locks, trunk, engine, and panic alarms. If your Chevrolet key fob is not currently programmed you can program it yourself in a matter of minutes from your car!

    How do I reprogram my key fob after replacing the battery?

  • Replace the batteries inside the key fobs.
  • Get inside the car.
  • Turn on the ignition.
  • Press the lock button on the remote key.
  • Listen for a Lock Sound.
  • Programming additional remotes.
  • Turn off the ignition.
  • Step out from your car and test the result.

  • How do you program a key fob for a 2006 Chevy Silverado?

    Where can I get key fob programmed?

    Call a local locksmith; they can usually program a key fob significantly cheaper.

    How much does it cost to program a Chevy key fob?

    The cost to program a new Chevy key depends on the type of key you need. Chip keys (double cut keys) generally cost around $75, while a laser cut key can run anywhere from $135 to $275. If you need a copy of a Chevy key that you still have the key to, you can simply have a car dealer or locksmith make one.

    How do dealers program key fobs?

    All key fobs need to be programmed. Some dealerships will do it for free, while others will charge a half-hour to an hour of labor. But there is a way around this fee. Most key fobs can be programmed with a specific combination of button presses on the remote and key turns in the ignition.

    Why is my key fob not being detected?

    What does it mean when your car says key not detected? It means that the vehicle can not receive a signal from a working key, often caused by weak batteries inside the key fob. Other possible issues include the wrong key is being used, or the key is damaged, which is common if the key has been exposed to water.

    How do you program a car key with only one key?

    Why does my key fob not work after replacing battery?

    While there are a few reasons that a keyless entry remote might stop working, most of them are pretty easy to check yourself. The most common problem with these car key fobs is that the batteries go dead over time, in which case replacing the battery should fix the problem.

    Can you program a key fob without going to the dealership?

    In reality, however, while creating a new key fob, as well as programming it to work with your car, may require the assistance of a professional, a skilled locksmith can aid you with this effort without requiring you to head back to the dealership for help.

    How long does it take to reprogram a key fob?

    Most dealers we contacted said key-fob programming typically takes just 15-30 minutes, and the whole process, including cutting the mechanical spare key, rarely takes longer than an hour.

    What does passive door unlock mean?

    The Passive Entry system is an enhancement to the vehicle's Remote Keyless Entry (RKE) system and a feature of Keyless Enter-N-Go — Passive Entry. This feature allows you to lock and unlock the vehicle's door(s) without having to push the RKE Key Fob lock or unlock buttons.

    How do I roll my windows Silverado with a key fob?

    Can I roll my windows up with my key fob?

    Here are a few examples of hidden key-fob features, some of which could be on the device for your car. Lower All Windows Instantly: One of the more common hidden functions on many of today's key fobs is the ability to roll down all the windows and open the sunroof at the same time by pressing a single button.

    How do I know if my Chevy key has a chip?

    Contact a locksmith. Give the locksmith the make, model and year of your car, and they should be able to find out if your car key has an electronic chip. Assume that your car has an electronic chip if it is a model made after 1995.

    How do I know if my truck key has a chip?

    Telling us what your key identification code can help us identify if your key has a transponder in it or not. Transponder keys also have a chip in the head of the key. Typically they have a plastic head and are larger than the mechanical key.

    What years did GM use vats?

    What is VATS? VATS (Vehicle Anti Theft System) was introduced by GM on the 1986 Corvette because the Corvette had become the number one target of car thieves. Corvette thefts dropped so impressively after VATS was implemented that GM expanded the system in 1988 to the Camaro, Firebird, and Cadillac Seville.

    Is a 2001 Silverado key chipped?

    Therefore, the 2001 Chevrolet Silverado does come with a chip in the key. This can be a pain if You're shelling out over $100 for a replacement or a spare, but it's good news in the big picture.

    How do I get a replacement key for my Chevy Silverado?

  • Call an automotive locksmith that offers a mobile service for cars.
  • Tow the car to the dealer.
  • Order a key online and have the dealer or locksmith cut and program it for you (if necessary).

  • Was this post helpful?

    Author: anyanswer

    Leave a Reply

    Your email address will not be published.