How Do You Change A Wheel Bearing On A Pontiac Grand Am?

How do you change a wheel bearing on a Pontiac Grand Am?

How much is a wheel bearing for a 2004 Pontiac Grand Am?

What's the cost for wheel bearing replacement on my Pontiac

For a national average across all vehicles, the average cost to replace the wheel bearings (for 1 wheel) is about $350.

Can you replace a wheel bearing without replacing the hub?

Your wheel bearing may have been damaged slightly in the past and has now worn to the point it is starting to make noise. Your mechanic is correct in that the only repair for the bearing is to replace the hub. It is a sealed unit and cannot be disassembled without destroying it.

How many hours does it take to replace a wheel bearing?

Replacing a single wheel bearing can take 90 to 120 minutes depending on the type of vehicle and complexity. There are a lot of moving parts that need to be maintained and properly sealed to complete this type of work.

What size is the hub nut on a 2004 Pontiac Grand Am?

5 Answers. The axle nut is 36mm.

Related most asked for How Do You Change A Wheel Bearing On A Pontiac Grand Am?

How do you change a wheel bearing on a 2000 Pontiac Grand Am?

Do you need an alignment after replacing a wheel bearing?

Anytime the steering/suspension system has been taken apart for whatever reason, its always a good idea to have alignment checked. You shouldn't have to have an alignment after a bearing/axle.

Should I replace both wheel bearings at the same time?

Both wheel bearings have racked up the same number of miles, so it's logical to conclude that both sides have probably experienced the same amount of wear. Based on this line of thinking, it would make sense to recommend replacing both wheel bearing hubs at the same time even though only one has obviously failed.

Can your tire fall off if you have a bad wheel bearing?

A bad wheel bearing can lead to uneven tire wear, which means you will have to purchase tires sooner. If a wheel bearing is missing, it is not recommended you drive the vehicle at all as the wheel can fall off entirely while the vehicle is in motion.

How long will a wheel bearing last once it starts making noise?

How Long Will a Noisy Wheel Bearing Last? Typically, a wheel bearing should last roughly 1,000 to 1,500 miles after it starts making noise. This doesn't mean you should keep driving since a noisy wheel bearing is always a risk.

Which wheel bearing is bad turning left?

How long can u drive on a bad wheel bearing?

To avoid this situation, it is recommended to drive at the slower speed so that your wheel stays in action a few more hours. SO, while thinking how long can you drive on a bad bearing? You should not go more than 1000 miles as it might result in some bigger issue.

What size is the axle nut on a 04 Grand Prix?

Beleive its actually 34mm, but most people including myself, have gotten away with using 36mm. 04 Comp G.

What size is the axle nut on a 06 Grand Prix?

36mm, if you're replacing the wheel bearing you need to clean the axle threads, lube them and torque a NEW nut to spec. torque.

What size is the axle nut on a 2007 Pontiac g6?

Torque that axle nut, the 35 millimeter axle nut, to 159 foot-pounds.

How do you change a wheel bearing on a 2003 Pontiac Bonneville?

Can you just replace one wheel bearing?

You should replace your hub assembly and wheel bearings. Here's how to replace wheel bearings. Even if only one side is bad, it makes sense to replace them in pairs. The “good” side is likely to cause problems in a relatively short time.

What are the signs of a bad wheel bearing?

The symptoms of bad wheel bearings include:

  • Noise: A humming, rumbling or growling noise that increases with acceleration or as the vehicle turns.
  • Looseness, excessive play in the steering wheel (vague steering);
  • Steering wheel vibration which changes with the vehicle speed or as the vehicle turns;
  • ABS malfunctioning.

  • How much is a wheel bearing replacement?

    It takes about 1 to 1.5 labor hours to change the wheel bearing. To sum it up, the replacement cost to change wheel bearing is around $150 – $800 and depends on if the whole hub is changed, or just the wheel bearing, which is specific to the car model.

    What is the average cost to replace front wheel bearings?

    You will pay about $400, on average, for front wheel bearing replacement. The labor will be anywhere from $140-$180, while parts may cost as little as $200 or as much as $400. The difference in prices is due to the cost of parts for more expensive cars as well as the various fees that individual mechanics charge.

    Is it difficult to replace wheel bearing?

    Is it easy to replace a wheel bearing at home? Replacing a wheel bearing that comes as an assembly with the hub and bolts to the spindle or steering knuckle is not very difficult if you have proper skills, tools and the manual. Of course, the large axle nut is very tight and can be difficult to remove.

    How much does it cost to replace both front wheel bearings?

    Both Sides

    The cost to replace both front wheel bearings is going to be between $260 and $480. What is this? The parts alone for the front wheel bearings are about $120 to $200. However, the labor costs will be a bit more extensive at around $140 to $280.

    What noise will a bad wheel bearing make?

    The classic sounds of a bad wheel bearing are cyclic chirping, squealing and/or growling noise. You can also tell that the sound is related to wheel bearings if it changes in proportion to vehicle speed. The sound can get worse with every turn, or it can disappear momentarily.

    Do wheel bearings affect brakes?

    We found significant play in the bearing, which can lead to a soft brake pedal. Brake rotors are held in alignment by wheel bearings. If you have a faulty or loose wheel bearing, the rotor will wobble on its axis. Now, when you hit the brake pedal, the piston has to travel farther than normal to apply the brakes.

    Can a bad wheel bearing cause lug nuts to loosen?

    A worn-out wheel bearing will become loose inside the hub. Another sign of a failing wheel bearing is the vibration it creates when steering the wheels. However, make sure to have your wheels properly checked when experiencing wheel vibrations as it could be also caused by a chassis misalignment or loose lug nuts.

    How much does it cost to replace 4 wheel bearings?

    Average Wheel Bearing Replacement Cost

    On average, a wheel bearing alone will cost you between $60 – $150, and an entire bearing and hub assembly replacement is around $200 – $400 for each wheel depending on your vehicle type.

    When I turn left my wheel bearing noise goes away?

    The reason that the bearing noise goes away on right turns (or curves) is during that maneuver the weight of the vehicle shifts from the right to the left and that "unloading" of the right side wheel position takes some of the vehicle weight off of the right wheel bearing, usually just enough to make the noise go away.

    Why is my car making a humming noise when I turn?

    If your car makes a humming noise, it could mean the differential needs lubricant, the transmission is failing or the universal joints or wheel bearings are wearing out.

    How do I know if I need a right or left wheel bearing?

    You can test this by gently swaying your car while driving slowly. If the noise lessens when you sway right, then the damaged bearing is likely on a left wheel bearing. If it lessens when you sway left, a right wheel bearing is likely broken.

    Can a bad wheel bearing affect gas mileage?

    If the torque applied was too high the bearings can be put into excessive pre-load, or if the torque was too low, the bearings can have excessive endplay. Both of which could affect fuel economy and the performance of the bearings over time.

    Was this post helpful?

    Author: anyanswer

    Leave a Reply

    Your email address will not be published.